V4 Wood Flooring FAQs

While wood floors are traditionally less tolerant of moisture than vinyl or tile, engineered V4 wood is more stable and better suited for humid areas than solid wood. With proper installation, sealing and maintenance, V4 flooring can be used in kitchens and utility rooms. However, caution is required in bathrooms or areas prone to frequent water exposure. It is essential to seal edges, manage water ingress, wipe up spills promptly and ensure subfloor moisture levels are within acceptable limits. Spacers can advise on best practices for your particular situation.

V4 Wood Flooring is a UK-based wood flooring brand, born from generations of experience in hardwood craftsmanship.  They specialise in both solid wood and engineered wood products, with emphasis on quality, stability, aesthetic finishes and responsible sourcing. Their product portfolio includes plank, herringbone and chevron formats, as well as decorative parquet and veneer options. 

Because of their engineering methods, V4 floors tend to retain the visual appeal of natural wood while improving dimensional stability, resistance to moisture, and suitability across a wider range of interior conditions.

Through Spacers, you can access a broad selection of V4 ranges and formats:

Engineered wood planks in oak, walnut and other species, available in multiple widths, thicknesses and finishes 

Herringbone and chevron patterns for decorative and traditional layouts 

Parquet and decorative designs such as V4 Deco series 

Driftwood collection offering a clicklocking engineered oak range that uses 5Gc glueless locking technology 

Solid wood (full hardwood) options for those who prefer thick, sandable wood floors (depending on structural suitability)

Spacers can show you physical samples and help you visualise how different boards and patterns might look in your space.

Selection should be guided by a few key criteria:

Construction (engineered vs solid): Engineered floors offer better stability, especially over modern subfloors or in environments with variable humidity. Solid wood, though traditional, may be more sensitive to movement.

Board thickness and wear layer: Many engineered V4 planks offer a substantial top veneer; thicker top layers allow more sanding or refinishing down the line.

Surface finish: Choose between oiled, lacquered, colouroiled or matt finishes depending on your aesthetic and maintenance preferences.

Pattern / format: Decide whether you want straightlaid planks, herringbone, chevron or other decorative parquet layouts.

Compatibility with underfloor heating: V4 offers engineered boards compatible with underfloor heating (subject to the manufacturer’s guidelines).

Grading / appearance: Rustic, character or select grades vary in knots, timber variation and grain character.

Your local Spacers showroom staff can run through these options with you and show you side-by-side samples to help decide.

While DIY installation is technically possible, we strongly recommend using a professional installer, especially for high-end wood floors like V4. Key steps include:

Ensuring the subfloor is level, dry and structurally sound

Acclimatising the wood to the room’s conditions

Laying the boards precisely (especially for herringbone / chevron)

Using correct adhesives (if gluedown) or click systems

Sealing edges and installing trims cleanly

Professional installers familiar with V4 will understand tolerances, moisture thresholds, and finishing requirements. Spacers can recommend reliable installers across the areas we serve.

With proper installation and maintenance, V4 wood flooring can last 30 years or more, especially when refinished or maintained periodically. Due to engineered design, the surface veneer can often be re-sanded once or more (depending on thickness). The durability depends on foot traffic, finish type, environmental conditions and maintenance. Because V4 is built to high standards, the life expectancy is strong when installed well.

Good maintenance protects both appearance and longevity. Here is recommended care:

Sweep or vacuum (soft brush) regularly to remove dust and grit

Use a slightly damp mop with a pHneutral wood floor cleaner

Avoid excessive water or liquid standing on the surface

Use felt pads under furniture legs and spread heavy loads

Reapply maintenance oil or sealant (if applicable) as per manufacturer guidelines

Do not use abrasive cleaners, waxes, bleach or harsh chemicals

Periodic deep cleaning and maintenance treatment helps preserve the finish

The staff at Spacers can advise exactly which maintenance products to use for your V4 finish type.

Yes, modular repair is one of the advantages of wood flooring. An individual plank or section can be repaired or replaced by a skilled installer, assuming spare matching boards are available from your original purchase batch. This avoids the need to replace the entire floor. We advise that you order some extra boards when making your initial purchase to cover future repairs.

V4 offers matching trims, thresholds, nosings and profiles to ensure smooth transitions between different flooring types or room levels. At Spacers we can help you select skirting, reducers, Tprofiles or expansion trim that matches both the finish and thickness of your floor. Proper detail and finishing are essential to a high quality result.

The final cost of your V4 flooring project will depend on:

The V4 range / series and finish you choose

Board width, length, thickness and wear layer

The complexity of the layout (herringbone, chevron, borders)

Subfloor preparation needed (levelling, moisture remediation)

Adhesive, underlay, trims and finishing materials

Labour / installer rates for your location

Access, waste removal and logistics

When you visit one of our showrooms (Ruislip, High Wycombe, Maidenhead) we can offer a detailed, no obligation quote based on your specific design and structural conditions.

Our three showrooms are situated to serve a wide local catchment:

• Ruislip – serving Uxbridge, Harrow, Pinner, Northwood and surrounding areas
• High Wycombe – serving Beaconsfield, Marlow, Bourne End, Gerrards Cross
• Maidenhead – serving Windsor, Slough, Bracknell, Ascot and nearby towns

Clients from Rickmansworth, Slough, Windsor, Beaconsfield, Harrow, Marlow and across the Home Counties are welcome to visit our display centres for consultations and sample viewing.

Here are reasons many customers prefer Spacers:

We are official V4 dealers with full display ranges

Our showrooms in Ruislip, High Wycombe and Maidenhead allow you to see large samples and compare finishes

Our staff offer expert technical advice on installation, maintenance and design

We can recommend vetted, experienced installers

We assist with warranty registration and aftercare support

We provide all necessary accessories (adhesives, trims, maintenance products)