Porcelanite DOS FAQs

Your choice should be guided by these factors:

Intended use (floor / wall / indoor / outdoor)

• Design aesthetic - stone, marble, wood effect, abstract or decorative relief
• Format and joint appearance - large formats with rectified edges lead to minimal joints
• Finish type - matt, polished, glazed, relief or textured surfaces (each has different cleaning and slip performance)

Slip or grip rating especially in wet areas

• Colour / tone selection - whether you want contrast, continuity or feature accent
• Matching with other areas - if tying into other tile ranges or blending with other finishes

Visiting one of our showrooms (Ruislip, High Wycombe, Maidenhead) will allow you to compare finish samples under your lighting and spatial conditions, making selection easier.

While a capable and experienced DIYer could install basic tile layouts, professional installation is strongly recommended for the best outcome, especially for Porcelanite DOS large formats or decorative tiles.

Key reasons:

Large tiles demand very flat substrates and precise leveling

Relief or patterned tiles require careful alignment and layout

Correct choice and application of adhesives, grouts, movement joints and edge trims

Precision cutting and finishing at transitions, corners and edges

Use of waterproofing membranes in wet zones

At Spacers, we can refer you to trusted tilers familiar with Porcelanite DOS products and their tolerances.

When installed correctly and maintained, Porcelanite DOS tiles are highly durable and capable of lasting for decades, especially porcelain ones. Their technical tile compositions and European manufacturing standards support long lifespans.

Warranty terms may vary by range and use (residential, commercial, exterior) - when you purchase through Spacers we will confirm the applicable warranty and guarantee for your selected tile.

Durability factors depend on:

Traffic levels

Floor loading

Maintenance and cleaning practices

Environmental exposure

Substrate stability

Porcelanite DOS is a Spanish tile manufacturer with over 40 years of experience and a presence in more than 100 countries. 

They specialise in porcelain and ceramic tiles, offering modern design, large format sizes, refined finishes, and a wide variety of effects (stone, wood, marble, decorative reliefs). 

Porcelanite DOS invests in innovation, versatility and high quality, making them a benchmark tile provider in Europe. 

Porcelanite DOS offers a broad selection of tile types and formats, including:

Porcelain stoneware for floor and wall use, in a range of finishes (matt, polished, rectified) 

Ceramic / glazed ceramic tiles for walls, decorative applications or lighter duty installations 

Large format sizes (e.g. 100 × 100 cm, 98 × 98 cm, 40 × 120 cm, 30 × 90 cm) for minimal joints and clean visual effects 

Decorative reliefs or textured finishes (relief motifs, patterns) for feature walls or accent zones 

Indoor & outdoor capable porcelain in ranges engineered for external use (frost resistance, slip control) 

These diverse offerings allow Porcelanite DOS tiles to be specified across walls, floors, wet rooms, feature walls and outdoor areas.

Yes, many Porcelanite DOS ranges are suitable for both interior and exterior use, subject to their technical specifications.

For outdoor use, it is essential to ensure that the tile selected has:

Adequate frost resistance

Low water absorption

Slip resistance / grip (or anti-slip finish)

Durability to weathering

For walls, the tile must be rated for ceramic or porcelain wall application (lighter weight / substrate suitability).

When planning a scheme that spans indoors and outdoors (for example, terrace or balcony), Porcelanite DOS often offers coordinated tiles across ranges to maintain continuity in aesthetics.

Yes, many of their porcelain and glazed ceramic tile lines are suitable for bathroom floors, walls, wet rooms and shower enclosures - provided they are correctly specified and installed.

Important considerations:

Use waterproofing membranes or tanking systems behind the tile in wet zones

Ensure slip resistance is sufficient for floor tiles (especially wet floors)

Use appropriate grouts and sealants, particularly at transitions, corners and perimeters

Use proper drainage and slope for floor portions

Avoid large spans or unsupported surfaces unless the tile is designed for it

Porcelanite DOS produces tile ranges specifically intended for bathroom / indoor wet area use. 

Maintenance is relatively straightforward:

Sweep or vacuum regularly to remove grit and debris

Mop with a damp mop and a pHneutral tile cleaner

For textured or relief surfaces, use soft brushes to clean grooves or details

Wipe spills quickly, especially for coloured or decorative tiles

Avoid harsh acids, bleach or abrasive cleaners

Use joint sealers or grout sealers if recommended by the tile or grout manufacturer

For outdoor tiles, occasional gentle pressure washing may be used (within safe limits)

Always test any cleaning product on a small hidden area first, especially for polished or decorative finishes.

Yes. Because tiles are modular, if you retain spare matching tiles, a professional installer can remove and replace a damaged tile or section with minimal disturbance to the rest of the installation.

We recommend ordering 5–10 % extra material at the time of purchase to allow for cuts, waste and future replacements.

Several variables influence cost:

Tile range / collection and finish (plain, polished, relief, decorative)

Tile size, format and edge finishing (rectified, special profiles)

Substrate preparation (levelling, remediation, waterproofing)

Adhesive, grout, membranes, trims, sealants

Labour / tiler rates (site complexity, precision work)

Waste allowance, transport, handling and delivery

Access, cutting complexity, movement joints and installation time

At Spacers, we can provide you with a detailed quotation that breaks down all these components.

Our showrooms are located to serve broad local catchments:

• Ruislip - serving Uxbridge, Harrow, Pinner, Northwood, Hillingdon
• High Wycombe - serving Beaconsfield, Marlow, Bourne End, Gerrards Cross
• Maidenhead - serving Windsor, Slough, Ascot, Bracknell and neighbouring towns

Clients from Windsor, Slough, Beaconsfield, Marlow, Rickmansworth and other nearby towns often visit to see full Porcelanite DOS displays, compare sample finishes and request quotes.

Here are key advantages of buying Porcelanite DOS via Spacers:

We are authorized stockists and display complete Porcelanite DOS ranges in our showrooms

You can see full size samples, compare finishes and assess textures in real environments

Our staff offer expert assistance with tile selection, layout planning, technical specification and aftercare

We can recommend installers experienced in Porcelanite DOS products

We assist with logistics, spare orders, matching tile backing and delivery

We support warranty registration and longterm aftercare guidance